Connecting The Power Source - Sony Glasstron PLM-S700 Mode D'emploi

Connecting the Glasstron (continued)
Notes
• Even if you use the supplied audio/video
cable, the audio and video signals may not be
carried to the Glasstron depending on the
video source. In this case, contact your Sony
dealer or local authorized Sony service
facility.

Connecting the power source

Connect the AC power adapter AC-PLM3 (supplied) to the DC IN connector on the power
supply box. Then, connect the AC power cord (supplied) to the AC power adapter and to a wall
outlet. Do not connect the power source until all other connections are complete.
20
-US
to wall outlet
AC power adapter
AC-PLM3 (supplied)
to DC IN connector
Display unit
• When you connect the Glasstron to the audio
output jacks (phono jacks) of your video
equipment, connect the Glasstron to both the
right and left audio output jacks. If you
connect the Glasstron to just one audio
output jack, you will hear sound from only
one of the stereo earphones.
AC power cord (supplied)
DC IN 8.4V
Power supply box