Sony BDV-N9100W Guide De Référence page 8

• Do not place metal objects in front of the
front panel. It may limit reception of
radio waves.
• Do not place the system in a place where
medical equipment is in use. It may cause
a malfunction of medical equipment.
• If you use a pacemaker or other medical
device, consult your physician or the
manufacturer of your medical device
before using the wireless LAN function.
On operation
If the system is brought directly from a cold
to a warm location, or is placed in a very
damp room, moisture may condense on the
lenses inside the main unit. Should this
occur, the system may not operate properly.
In this case, remove the disc and leave the
system turned on for about half an hour
until the moisture evaporates.
On adjusting volume
Do not turn up the volume while listening
to a section with very low level inputs or no
audio signals. If you do, the speakers may
be damaged when a peak level section is
suddenly played.
On cleaning
Clean the cabinet, panel, and controls with
a soft cloth slightly moistened with a mild
detergent solution. Do not use any type of
abrasive pad, scouring powder or solvent
such as alcohol or benzine.
On cleaning discs, disc/lens
cleaners
Do not use cleaning discs or disc/lens
cleaners (including wet or spray types).
These may cause the apparatus to
malfunction.
On replacement of parts
In the events that this system is repaired,
repaired parts may be retained for reuse or
recycling purposes.
GB
8
On your TV's color
If the speakers cause the color irregularity
on your TV screen, turn off the TV then
turn it on after 15 to 30 minutes. If color
irregularity persist, place the speakers
further away from the TV set.
IMPORTANT NOTICE
Caution: This system is capable of
holding a still video image or on-screen
display image on your TV screen
indefinitely. If you leave the still video
image or on-screen display image
displayed on your TV for an extended
period of time, you risk permanent
damage to your TV screen. Plasma
display panel televisions and projection
televisions are especially susceptible to
this.
On moving the system
Before moving the system, make sure that
there is no disc inserted, and disconnect the
AC power cord (mains lead) from the wall
outlet (mains).
On Bluetooth
communication
• Bluetooth devices should be used within
approximately 10 meters (unobstructed
distance) of each other. The effective
communication range may become
shorter under the following conditions.
– When a person, metal object, wall or
other obstruction is between the devices
with a Bluetooth connection
– Locations where a wireless LAN is
installed
– Around microwave ovens that are in
use
– Locations where other electromagnetic
waves occur