Sony STR-DA5200ES Mode D'emploi page 99

Name Function
C ;DIGITAL
Lights up when the receiver
(EX) is decoding Dolby Digital
Surround signals. When the
receiver is decoding Dolby
Digital Surround EX
signals, ";DIGITAL EX"
also lights up. When
playing a Dolby Digital
format disc, be sure that you
have made digital
connections and that
INPUT MODE is not set to
"ANALOG" (page 93).
D INPUT
Lights up constantly. One of
the input indicators also
lights up according to the
current input.
E AUTO
Lights up when INPUT
MODE is set to "AUTO"
(page 94).
F HDMI 1 2 3 Lights up when the receiver
recognizes a component
connected via an HDMI IN
jack (page 28).
G DTS (-ES)
Lights up when DTS
signals are input. "DTS-
ES" also lights up when
DTS-ES signals are
decoded. When playing a
DTS format disc, be sure
that you have made digital
connections and that
INPUT MODE is not set to
"ANALOG" (page 94).
H 96/24
Lights up when the receiver
is decoding DTS96/24 (96
kHz/24 bit).
I COAX
Lights up when INPUT
MODE is set to "AUTO"
and the source signal is a
digital signal being input
through the COAXIAL
jack.
Name Function
J OPT
Lights up when INPUT
MODE is set to "AUTO"
and the source signal is a
digital signal being input
through the OPTICAL jack.
K ANALOG
Lights up when INPUT
MODE is set to "AUTO"
and no digital signal is
being input through the
COAXIAL or OPTICAL
jacks, or when INPUT
MODE is set to
"ANALOG," or when the
"2ch Analog Direct" is
being used (page 94, 111).
L MULTI IN
Lights up when MULTI IN
is selected (page 48).
M BI-AMP
Lights up when surround
back speakers selection is
set to "BI-AMP."
N D.RANGE
Lights up when dynamic
range compression is
activated (page 74).
O EQ
Lights up when the
equalizer is activated
(page 75).
P XM
Lights up when XM Radio
is selected (page 81).
Q CAT
Lights up when category
mode is selected during XM
Radio operation (page 81).
R ZONE 2/
Lights up while operation in
ZONE 3 zone 2/zone 3 is being
enabled.
S SLEEP
Lights up when the sleep
timer is activated
(page 101).
continued
99 GB