Playback; Selecting A Component - Sony STR-DA5200ES Mode D'emploi

Playback

Selecting a component

3
MUTING
1
Press one of the input buttons.
When you want to select a
component connected to the
PHONO, the MULTI CHANNEL
INPUT or the MD/DAT jack,
press SHIFT and then press
PHONO, MULTI IN or MD/DAT.
You can also use INPUT SELECTOR on
the receiver. To select a component
connected to the MULTI CHANNEL
INPUT jacks, press MULTI CH IN.
48
GB
Selected
input
VIDEO 1, 2
VIDEO 3
DVD
1
TV/SAT
TAPE/CD-R
MD/DAT
SA-CD/CD
TUNER
PHONO
MULTI IN
USB
HDMI 1, 2, 3 HDMI components connected
2
Turn on the component and
start playback.
3
Press MASTER VOL +/– to
adjust the volume.
You can also use MASTER VOLUME on
the receiver.
The initial volume level is set to minimum
(muting).
Components that can be
played back
VCR, etc., connected to the
VIDEO 1 or VIDEO 2 jack
Video camera and TV game,
etc., connected to the VIDEO
3 jack
DVD player, etc., connected
to the DVD jack
Satellite tuner, etc., connected
to the TV/SAT jack
Tape deck, etc., connected to
the TAPE jack
MD or DAT deck, etc.,
connected to the MD/DAT
jack
Super Audio CD or CD
player, etc., connected to the
SA-CD/CD jack
Built-in radio tuner
Turntable, etc., connected to
the PHONO jack
Component connected to the
MULTI CHANNEL INPUT
jack
Portable audio, etc.,
connected to the USB jack
to the HDMI 1, HDMI 2 or
HDMI 3 jack