Preparations; Installing "Dta Controller; Google Play; Turning On The Lighting/Power - Yamaha LSX-70 Mode D'emploi

Preparations

Install Yamaha's application "DTA CONTROLLER" and turn the unit on.

Installing "DTA CONTROLLER"

Installing DTA CONTROLLER application on a mobile device, such as a smartphone or tablet
computer, allows you to use a variety of additional convenient features of Yamaha desktop
audio systems.
Features
• Turning on/off of the unit, adjusting volume
• Turning on/off the lighting, adjusting the brightness of the lighting
• Setting of the SMART TIMER (
P.11)
• Playing back songs stored in a smart phone or tablet
The mobile device needs to be connected with the unit via
http://itunes.com/app/
dtacontroller

Google Play™

https://play.google.com/
store/apps/
details?id=com.yamaha.av.
dtacontroller
6
En
connection ( P.7).
(For users in the U.S.A.)
https://itunes.apple.com/us/
app/dta-controller-us/
id549333293?mt=8
* If access to any of these fails, search for "DTA
CONTROLLER" on the App Store or
Google Play.

Turning on the lighting/power

1
Connect the AC adaptor to the unit and plug the power plug
into a wall outlet.
2
• Press
to turn on the light.
- Lighting can be turned on/off even when the power of
the unit is off.
- To adjust the brightness, press the Lighting +/–
button (5 steps).
• Press A
to turn on the unit.
- The unit plays a startup tone and turns on. You can then play music.
Auto standby function
• The auto standby function will be activated as follows (default setting).
- The unit turns off automatically if no operation has been performed for more than
20 minutes with no device connected to AUX or via
- The unit turns off automatically if no operation has been performed for more than 8 hours.
Activating/deactivating the auto standby function
1
Press to turn on the light.
2
Press and hold for at least 10 seconds.
• The auto standby function switches and the lighting (
- Auto standby is activated: The lighting blinks three times.
- Auto standby is deactivated: The lighting blinks once.
Turning the notification-tone function on/off
• If you want to turn the notification tones (startup tone/shutdown tone,
connection tone, maximum/minimum volume notification tone) on or off, when the
A
unit is off, press while pressing
- If turning on the notification tones: The unit plays the startup tone.
- If turning off the notification tones: The unit does not play the startup tone.
connection.
P.5) blinks.
to turn on the unit.