Kopp GCM 620 Manuel D'utilisation page 15

Display Detail
Refer to Figure 2 to identify the various display annunciators.
12 Peak Hold Annunciator - This annunciator is displayed any
time the hold mode is active.
13 AC Annunciator - Displayed when an AC measurement is
selected.
14 Diode Annunciator - This symbol is visible when in the
diode test function.
15 Negative Sign Annunciator - This annunciator is display-
ed when DC voltage is measured and the VžHz jack is
negative with respect to the COM jack.
16 Continuity Annuciator - Displayed when the Meter is in the
resistance (continuity) function.
17 Low Battery Annunciator - This annunciator is displayed
when the battery needs to be replaced.
18 Overload Indication - This is the display when the input ex-
ceeds the display capability of the Meter. If measuring
voltage or current, remove the input immediately.
FIGURE 1 - FRONT VIEW OF THE METER
2
4
8
7
9
15
1
3
5
6
11
10