Parkside PFBA 20-Li A1 Traduction Des Instructions D'origine page 21

General description
An illustration of the most im-
portant functional components
can be found on the fold-out page.
Extent of the delivery
Carefully unpack the trimmer and check
that it is complete. Dispose of the packag-
ing material correctly.
• Device (2-part)
• Additional handle
with spare brush storage
• 1 x metal brush
• 1 x nylon brush
• Instruction Manual
The rechargeable battery and char-
ger are not included in delivery.
Functional description
The hand-operated joint brush is equipped
with an electric motor.
Depending on the application require-
ments, there are two different brushes
which can be used for cleaning joints and
surfaces.
The telescopic arm enables comfortable
operation in an upright posture.
Please refer to the descriptions below for
information about the operating devices.
Survey
1 Handle
2 On/off switch
3 Switch lock
4 Handle screw, additional handle
5 Screw socket for length adjustment
6 Telescopic arm
7 Splash guard
8 Motor head
9 Guiding roller
10 Additional handle
10a Spare brush storage
11 Narrow metal brush
12 Narrow nylon brush
13 Rechargeable battery
14 Charger
15 Screw sleeve
16 Screw
17 Brush support
18 Suspension eye
Technical data
Cordless
Patio Brush 20V ....... PFBA 20-Li A1
Motor voltage ............................. 20 V
Protection category...........................IPX0
Idling speed n
.................... 1200 min
max
Weight (without accessories) ....... ca. 2 kg
Weight (accessories only) ............ 0.25 kg
Sound pressure level
(L ) ....................... 64.7 dB; K
pA
Sound power level (L
measured .............. 76.5 dB; K
guaranteed ............................... 80 dB
Vibration (a )
h
additional handle .0.6 m/s
handle ............. .0.7 m/s
Temperature.......................... max. 50 °C
Charging process ....................4 - 40 °C
Operation ........................... -20 - 50 °C
Storage ..................................0 - 45 °C
For use with smart batteries
(Smart PAPS 204 A1/Smart PAPS 208 A1)
Operating frequency/
Frequency band..... 2400 - 2483.5 MHz
Max. transmission power........≤ 20 dBm
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
GB MT
= 3 dB
pA
)
WA
= 3 dB
WA
; K= 1,5 m/s
2
; K= 1,5 m/s
2
-1
2
2
21