Fine Adjusting Equalizer Curve; Adjusting Bass; Adjusting Treble - Pioneer DEH-P8400MP Mode D'emploi

Masquer les pouces Voir aussi pour DEH-P8400MP:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Section
Audio Adjustments
07

Fine adjusting equalizer curve

You can adjust the center frequency and the Q
factor (curve characteristics) of each currently
selected curve band (
Level (dB)
Center frequency Frequency (Hz)
1 Press
OPEN
2 Press
AUDIO
the Q factor (e.g.,
display.
3 Press
AUDIO
adjustment.
low—mid—high
4 Press 2 or 3 to select the frequency.
Press 2 or 3 until the desired frequency
appears in the display.
low :
40
80
100
mid :
200
500
high :
3.15 k
8 k
5 Press 5/∞ to select the desired Q factor.
Press 5 or ∞ until the desired Q factor appears
in the display.
2 N
1 N
1 W
Note
• If you make adjustments when a curve other
than
CUSTOM2
is updated.
40
En
EQ-Low/EQ-Mid/EQ-High
Q=2W
Q=2N
to open the front panel.
and hold until frequency and
) appears in the
F 80 Q 1W
to select the desired band for
(Hz)
160
(Hz)
1 k
2 k
(Hz)
10 k
12.5 k
2 W
is selected,
CUSTOM1

Adjusting bass

You can adjust the cut-off frequency and the
bass level.
).
• In
mode, bass adjustment affects only
FRT1
the rear output: front output cannot be
adjusted.
1 Press
OPEN
2 Press
AUDIO
Press
AUDIO
3 Press 2 or 3 to select the frequency.
Press 2 or 3 until the desired frequency
appears in the display.
40
63
100
4 Press 5 or ∞ to adjust the bass level.
Each press of 5 or ∞ increases or decreases
the bass level.
increased or decreased.

Adjusting treble

You can adjust the cut-off frequency and the
Treble level.
• In
and
FRT1
affects only the front output: rear output cannot
be adjusted.
1 Press
OPEN
2 Press
AUDIO
Press
AUDIO
3 Press 2 or 3 to select the frequency.
Press 2 or 3 until the desired frequency
curve
appears in the display.
2.5k
4k
6.3k
4 Press 5 or ∞ to adjust the treble level.
to open the front panel.
to select
.
Bass
until
appears in the display.
Bass
(Hz)
160
is displayed as the level is
+6
–6
modes, treble adjustment
FRT2
to open the front panel.
to select
.
Treble
until
appears in the display.
Treble
(Hz)
10k

Publicité

Chapitres

Table des Matières
loading

Table des Matières