Playing Tracks In A Random Order; Scanning Cds And Tracks; Pausing Cd Playback - Pioneer DEH-P8400MP Mode D'emploi

Masquer les pouces Voir aussi pour DEH-P8400MP:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Multi-CD Player

Playing tracks in a random order

Random play lets you play back tracks in a ran-
dom order within the repeat range,
(multi-CD player repeat) and
repeat).
1 Select the repeat range.
Refer to Repeating play on page 30.
2 Press
to open the front panel.
OPEN
3 Press
to select
FUNCTION
Press
until
FUNCTION
play.
4 Press 5 to turn random play on.
appears in the display. Tracks will
Random :ON
play in a random order within the previously
selected
(multi-CD player repeat) or
RANDOM
(disc repeat) ranges.
D.RANDOM
5 Press ∞ to turn random play off.
appears in the display. Tracks will
Random :OFF
continue to play in order.

Scanning CDs and tracks

While you are using
T.SCAN
beginning of each track on the selected disc
plays for about 10 seconds. When you are using
(multi-CD player repeat), the beginning
D.SCAN
of the first track of each disc is played for about
10 seconds.
1 Select the repeat range.
Refer to Repeating play on page 30.
2 Press
to open the front panel.
OPEN
RANDOM
(disc
D.RANDOM
.
RDM
appears in the dis-
RDM
(disc repeat), the
3 Press
to select
FUNCTION
Press
until
FUNCTION
display.
4 Press 5 to turn scan play on.
appears in the display. The first 10
Scan :ON
seconds of each track of the present disc (or the
first track of each disc) is played.
5 When you find the desired track (or disc)
press ∞ to turn scan play off.
appears in the display. The track (or
Scan :OFF
disc) will continue to play.
• If the display has automatically returned to
the playback display, select
pressing
.
FUNCTION
Note
• After track or disc scanning is finished, nor-
mal playback of the tracks will begin again.

Pausing CD playback

Pause lets you temporarily stop playback of the
CD.
1 Press
to open the front panel.
OPEN
2 Press
to select
FUNCTION
Press
until
FUNCTION
display.
3 Press 5 to turn pause on.
appears in the display. Play of the
Pause :ON
current track pauses.
4 Press ∞ to turn pause off.
appears in the display. Play will
Pause :OFF
resume at the same point that you turned pause
on.
• Pressing
also turns pause on or off.
PAUSE
.
SCAN
appears in the
SCAN
again by
SCAN
.
PAUSE
appears in the
PAUSE
En
Section
06
31

Publicité

Chapitres

Table des Matières
loading

Table des Matières