Replacing The Air Filter Sponge; Pulling Rope; Cleaning The Pulling Rope; Replacing The Pulling Rope - NORDFOREST 1800 Mode D'emploi

Cleaning and maintenance
88 Capstan winch 1800, 1200, 400

Replacing the air filter sponge

If the air filter sponge is damaged or worn:
›
Unscrew the air filter cover.
›
To do so use a suitable tool, such as a Phillips screwdriver.
›
Remove the damaged or worn air filter sponge.
›
Insert the new air filter sponge.
›
Retighten the screws.

Pulling rope

Cleaning the pulling rope

›
Clean the pulling rope of wood residues and other dirt after every
use.
›
In case of heavier soiling, clean the pulling rope with clear water or
with rope washing products available from retailers.
›
Do not use corrosive or aggressive cleaning agents.
›
After every use dry the pulling rope in air and stow it loose in a rope
bag.

Replacing the pulling rope

›
Replace a worn, damaged or torn pulling rope promptly.

Spark plug

The spark plug is in the top section of the capstan winch, next to the
air filter cover.

Inspecting the spark plug

Inspect the spark plug at least every 50 operating hours. Be
i
aware of the electrode spacing. The electrode spacing must be
0.5–0.6 mm.
900012 Rev. 01 | 09.2017