NORDFOREST 1800 Mode D'emploi page 80

900012 Rev. 01 | 09.2017
›
Draw the rope locking mechanism at the handle to the capstan
drum, up to the stop.
›
Only capstan winch 1800: Simultaneously draw the locking pin up
and the rope locking mechanism further forwards.
›
Only capstan winch 1800: Release the locking pin.
›
Take the pulling rope out of the rope clamp cut-out.
›
Wind the pulling rope around the entire rope clamp.
›
Only capstan winch 1800: Draw the locking pin up again and
guide the rope locking mechanism back again, so that the pulling
rope lies around the white rope guide pulley.
›
Only capstan winch 1200 and 400: Guide the rope locking
mechanism back again, so that the pulling rope lies around the
white rope guide pulley.
›
Run the pulling rope around the deflection hook.
The pulling rope is correctly drawn in.
Commissioning and operation
Capstan winch 1800, 1200, 400 75