Operating; Steps Before Using A New Stand; Protective Equipment - Husqvarna DS150 Manuel D'utilisation

Steps before using a new stand

• Please read the operator's manual carefully and make
sure you understand the instructions before using the
machine.
• This machine is designed for and intended for drilling
concrete, brick and different stone materials. All other
use is improper.
• The machine is intended for use in industrial
applications by experienced operators.
• Keep the workplace tidy. Disorder leads to accident
risks.
• Also read the operating manual enclosed with the drill
motor and check that its performance is compatible
with the stand.
Always use common sense
It is not possible to cover every conceivable situation you
can face. Always exercise care and use your common
sense. Avoid all situations which you consider to be
beyond your capability. If you still feel uncertain about
operating procedures after reading these instructions,
you should consult an expert before continuing.
Do not hesitate to contact your dealer if you have any
more questions about the use of the machine. We will
willingly be of service and provide you with advice as well
as help you to use your machine both efficiently and
safely.
Let your Husqvarna dealer regularly check the machine
and make essential adjustments and repairs.
All information and all data in the Operator's Manual were
applicable at the time the Operator's Manual was sent to
print.
WARNING! Under no circumstances
!
should you modify the original design of
the machine without approval from the
manufacturer. Always use original spare
parts. Unauthorized modifications and/or
accessories may lead to serious injury or
death to the user or others.

OPERATING

Protective equipment

General
Do not use the machine unless you are able to call for
help in the event of an accident.
Personal protective equipment
You must use approved personal protective equipment
whenever you use the machine. Personal protective
equipment cannot eliminate the risk of injury but it will
reduce the degree of injury if an accident does happen.
Ask your dealer for help in choosing the right equipment.
!
!
!
Always wear:
• Protective helmet
• Hearing protection
• Protective goggles or a visor
• Breathing mask
• Heavy-duty, firm grip gloves.
• Tight-fitting, heavy-duty and comfortable clothing that
permits full freedom of movement.
• Boots with steel toe-caps and non-slip sole
• Always have a first aid kit nearby.
Be careful as clothing, long hair, and jewellery can get
caught in moving parts.
WARNING! The use of products such as
cutters, grinders, drills, that sand or form
material can generate dust and vapors
which may contain hazardous chemicals.
Check the nature of the material you
intend to process and use an appropriate
breathing mask.
WARNING! Long-term exposure to noise
can result in permanent hearing
impairment. So always use approved
hearing protection. Listen out for
warning signals or shouts when you are
wearing hearing protection. Always
remove your hearing protection as soon
as the engine stops.
WARNING! There is always a risk of
crush injuries when working with
products containing moving parts. Wear
protective gloves to avoid body injuries.
–
English 9