Télécharger Imprimer la page

DK2 POWER OPC503V Manuel D'utilisation page 24

Masquer les pouces Voir aussi pour OPC503V:

Publicité

Les langues disponibles

Les langues disponibles

OPERATING INSTRUCTIONS

DANGER: Read and understand the complete User Manual before assembling or
using this equipment! Failure to comprehend and comply with warnings, cautions, and
instructions for assembly and operation could result in serious injury or death.

DANGER: Do not permit children to operate this equipment at any time.

DANGER: Do not permit others that have not read and understood the complete User
Manual to operate this equipment. Operation of power equipment can be dangerous. It is
the sole responsibility of the operator to understand the assembly and safe operation of
this equipment.

CAUTION: Oil must be added to the engine before starting or operating.
ENGINE OIL RECOMMENDATIONS
SAE 10W-30 is recommended for general use. Refer to the SAE Viscosity Grades chart in
your engine owner's manual for average temperature ranges. The engine manufacturer
recommends using API SERVICE category SE or SF oil.
STARTING INSTRUCTIONS
For information on starting and stopping the engine, refer to your Engine Owner's
Manual.

WARNING: NOTE
For operation in wooded areas, obtain a spark arrestor for the exhaust system. See the
Engine Operating and Maintenance Manual and check with your authorized service
center. See also Fire Prevention in the Section II • Safety in this Manual.

WARNING: TOWING
Before towing, the safety chains must be secured to the hitch or bumper of the vehicle.
Local regulations should be checked regarding licensing, lights, towing, etc. Turn the
engine off prior to towing. Do not exceed 15mph (24km/h) when towing this equipment.
See also Towing Safety in Section II • Safety in this manual.
Please refer to Section II • Safety in this manual for extensive list of warnings and precautions
prior to operating this equipment.
24 | OPC503V man.

Publicité

loading

Ce manuel est également adapté pour:

Opc503vx