Technical Data Technical Data; Cutting Equipment - Husqvarna K760 Cut-n-Break Manuel D'utilisation

Technical data
Technical data
Engine
Cylinder displacement, cm
Cylinder bore, mm
Stroke, mm
Idle speed, rpm
Wide open throttle - no load, rpm
Power, kW/ rpm
Ignition system
Manufacturer of ignition system
Type of ignition system
Spark plug
Electrode gap, mm
Fuel and lubrication system
Manufacturer of carburettor
Carburettor type
Fuel tank capacity, litre
Water cooling
Recommended water pressure, bar
Weight
Power cutter without fuel (exclusive cutting blade), kg
Power cutter without fuel (inclusive cutting blade), kg
Noise emissions (see note 1)
Sound power level, measured dB (A)
Sound power level, guaranteed L
Sound levels (see note 2)
Equivalent sound pressure level at the operator's ear, dB(A)
Equivalent vibration levels, a
2
Front handle, m/s
2
Rear handle, m/s
Note 1: Noise emissions in the environment measured as sound power (L
EC. The difference between guaranteed and measured sound power is that the guaranteed sound power also includes
dispersion in the measurement result and the variations between different machines of the same model according to
Directive 2000/14/EC.
Note 2: Equivalent sound pressure level, according to EN ISO 19432, is calculated as the time-weighted energy total for
different sound pressure levels under various working conditions. Reported data for equivalent sound pressure level for
the machine has a typical statistical dispersion (standard deviation) of 1 dB (A).
Note 3: Equivalent vibration level, according to EN ISO 19432, is calculated as the time-weighted energy total for
vibration levels under various working conditions. Reported data for equivalent vibration level has a typical statistical
dispersion (standard deviation) of 1 m/s

Cutting equipment

Cutting blade Max cutting depth, mm Max. peripheral speed, m/s
9" (230 mm) 400
TECHNICAL DATA
3
dB (A)
WA
(see note 3)
hveq
2
.
80
K760 Cut-n-Break
74
51
36
2700
9300 (+/- 100)
3,7/9000 / 5,0/9000
SEM
CD
Champion RCJ 6Y/NGK BPMR 7A
0,5
Zama
C3
0,9
0,5-10
9,6
11,1
113
115
101
1,9
2,8
) in conformity with EC directive 2000/14/
WA
Max. speed of output shaft, rpm
5900
English – 25