Cappuccino - MAGIMIX Le Robot Café Automatic Mode D'emploi

Cappuccino

Assemble the attachment.
STEAM IS
HEATING
P > ok exit
Wait for the STEAM IS READY
message to be displayed.
Brewing a Cappuccino?
Prepare your frothy milk
as described above.
Cleaning the Cappuccino attachment
Fill the jug with water and
place the Cappuccino
pipe in the water.
Slowly turn the
tap on.
Attach it to the nozzle.
Slowly turn the
tap on.
Press to return to
coffee mode.
Place a cup under the
nozzle.
Open valve
Place 1 cup under the
nozzle. Put the pipe in a
jug 1/3 full of milk.
Open
Milk sucked
Open valve
Prepare 1 or 2 cups
of coffee.
Press.
Water will be drawn up into
the pipe. Turn the steam dial
when water runs clear and
the pipe is clean.
USING THE NOZZLE
Press.
Close
Turn the tap and
valve off.
Press to return
to coffee mode.
Spoon the desired
amount of froth on top
of the coffee.
STEAM IS
HEATING
P > ok exit
Wait until the STEAM
READY message is
displayed.
Turn the tap and valve
off
49