Troubleshooting - MAGIMIX Le Robot Café Automatic Mode D'emploi

TROUBLESHOOTING

Question
No coffee flow.
Coffee flow reduced to a dribble.
Coffee too watery, not strong enough.
Unpleasant taste.
Coffee not hot enough.
Insufficient coffee flow.
Grinder making unusual noise.
Milk not frothy enough.
Cappuccino attachment not drawing up
liquid.
No steam or hot water supply.
Water around the base of the machine.
Machine not working at all.
The descaling programme will not start.
Trouble with initial start up.
This symbol means that this product must not be treated as household waste. It must be taken to a suitable
collection point for the recycling of electrical or electronic equipment.
To find out where your nearest collection points are, contact your local council or the local waste reception centre.
We reserve the right to modify the characteristics of this machine at any time and without prior notice.
56
The information contained in this document is not legally binding.
All rights reserved for all countries by Magimix.
Check the positioning of the water tank.
Fill the water tank.
Check the positioning of the trays.
Machine clogged with limescale --- > descale.
Clean the central unit filter.
Coffee ground too finely --- > adjust the setting to a coarser
grind.
Refill the coffee bean compartment.
Reduce the volume of coffee in ml.
Select a stronger coffee by pressing
Reduce the fineness of the grind.
Coffee: stale? acidic? --- > replace the coffee beans.
Chlorinated water? --- > use the filter cartridge or bottled water
(low mineral content).
After descaling, fill the water tank and rinse the machine
through, ½ via the nozzle, ½ via the flow heads.
Preheat the cups using the hot water nozzle.
Adjust the coffee temperature setting.
Refill the coffee bean compartment.
Refill the coffee bean compartment.
Call Magimix Customer Care 01483 427411.
Nozzle or pipe: blocked? clogged with limescale? --- > see
"Aftercare" chapter.
Use cold, full fat milk.
Clean the tube (see p. 49 ).
Check that the attachment components have been properly
assembled.
Check valve is open.
Clean the nozzle (see p. 49).
Empty the drip tray.
Check all the connections.
Close the ground coffee compartment and wait for one minute.
Press S.
Call Magimix Customer Care 01483 427411.
Deactivate the filter option. (see p. 44)
Ensure machine has been rinsed through following the
instructions to allow you to change the language.
Answer