Attachment Of The Flash Unit - Sony HVL-F32M Mode D'emploi

Attachment of the flash unit

1
Turn off the power of the flash unit.
If the built-in flash of the camera is protruding, lower it before
attaching the flash unit.
2
Remove the protective cap from the terminal of the
Multi Interface foot of the flash unit and remove the
shoe cap from the camera.
3
Rotate the lock lever towards [RELEASE] while
pressing the release button.
4
Firmly insert the Multi Interface foot all the way into
the Multi Interface Shoe of the camera in the direction
of the arrow.
16
GB