Base Setting; Dialling Method; Call Barring; Setting The Flashing Time - THOMSON SppedTouch D51 Manuel D'utilisation

STD51.qxd 12/05/04

7. BASE SETTING

(supplied with
7.1

DIALLING METHOD

You can choose tone or pulse dialling. The default is tone dialling.
Press to enter the menu.
l
Select "BS Setting" and press
l
Enter "MASTER PIN:" 1590 (by default) and press
l
Select "Dial Mode" and press
l
Select "DTMF Dial" or "PULSE Dial" and press
l
7.2

CALL BARRING

You can program up to 5 call barrings per base. These call barrings may cover
all the terminals or just some of them. It is possible to bar the first 5 digits.
Press to enter the menu.
l
Select "BS Setting" and press
l
Enter "MASTER PIN:" 1590 (by default) and press
l
Select "CallBarring" and press
l
For example, to bar access the international network:
Enter 00 and press
l
Then choose the telephone or telephones
l
that will be covered by the barring and
press to confirm.
The call barring is activated on handsets 1, 2 and 5.
7.3

SETTING THE FLASHING TIME

Press to enter the menu
l
Select "BS Setting" and press
l
Enter "MASTER PIN:" 1590 (by default) and press
l
Select "Flash Time" and press
l
50
14:15 Page 50
D150
to confirm.
to confirm.
to confirm.
to confirm.
to confirm.
pack)
to confirm.
to confirm.
to confirm.
to confirm.
No. 1 : 00
HS No.
12XX5XXXX
to confirm.
to confirm.