Configuring The Base's Lines; Line Priority; Choosing The Ringing Group - THOMSON SppedTouch D51 Manuel D'utilisation

STD51.qxd 12/05/04

2. CONFIGURING THE BASE'S LINES

(supplied with
You can configure the base's lines according to your requirements.
2.1

LINE PRIORITY

You have the following options for managing the outgoing calls for each tele-
phone:
- Alternative (Line 1 or Line 2): default setting
- Line 1 First: line 1 takes priority and if this line is busy, line 2 will be used
- Line 2 First: line 2 takes priority and if this line is busy, line 1 will be used
- Line 1 Only (line 1): line 1 authorized and no access to line 2
- Line 2 Only (line 2): line 2 authorized and no access to line 1
- No Ext (internal calls only)
This line priority has no effects on the reception of incoming calls.
Press to enter the menu.
l
Select "BS Setting" and press
l
Enter the "MASTER PIN:" 1590 (by default) and press
l
Select "Select Line" and press
l
Use the
l
list and press
Choose the line priority from the 6 options given above and press
l
confirm.
2.2

CHOOSING THE RINGING GROUP

Each telephone may receive a call on line 1 and/or line 2.
For example, you may decide that telephones 1, 3 and 5 will be associated
with line 1 and ring on line 1 and that telephones 2 and 4 will be associated
with line 2 and ring on line 2.
Press to enter the menu.
l
Select "BS Setting" and press
l
Enter the "MASTER PIN:" 1590 (by default) and press
l
14:14 Page 35
to confirm.
and keys to choose the telephone you want from the
to confirm (HS1 = telephone 1).
to confirm.
D150 pack)
to confirm.
to confirm.
to
to confirm.
35