TopCold 310 Manuel D'utilisation page 15

• Place your appliance as shown in Figure 2. Then, mount two cas-
tors with brakes in the to the back side of the container, by fixing the
castors in the sockets under the container and ensure that the sock-
et centers are aligned, as shown in figure 4. Then place the U-pins
through the holes. Ensure the stability by placing the pim wedges.
•By placing the container as shown in figure 3, mount the two castors
in the castor box as shown in figure 5, by applying the same procedure.
Fig. 4
Fig. 5
15
Fig. 5