+
Fig. 2
Mount your glass by placing it on the mounting rack below by placing
one side, then placing on the other side and fix it as shown in Figure 2.
Then place the glass stopper on the left side of the lower canal with
the tabs in the back.
Slide the glass on the bottom channel to the left (Figure 3). Do the
same with the channel gap in the right side so that the tabs of the glass
stopper pass through the channel. Do the same by repeating the same
process when installing the upper glass.
NOTE: Glass stoppers shall be installed to the profile duct on the
front side of the cabinet for flat cabinet, and to the profile duct on the
rear side of the cabinet for slanted cabinet.
CASTOR MOUNTING INSTRUCTIONS
Fig. 1
Fig. 2
14
Fig. 3
Fig. 3