Wear Parts; Spare Parts - Oase BioMaster 250 Notice D'emploi

- EN -
Cleaning the suction chamber of the pre-filter
The suction chamber only has to be cleaned if venting does not function even though the filter foams
and valve box of the pre-filter have been cleaned.
Prerequisite: The pre-filter has been removed. (→ Removing the pre-filter P.8)
!
CAUTION
There is a strong spring in the suction chamber
that can act like a projectile.
Risk of injury due to parts flying around
• When opening the suction button, do not
point it at persons.
• Firmly hold the suction button.
How to proceed:
W
1. Press in the engagement hooks, hold and turn the
locking ring counter-clockwise (bayonet lock).
2. Carefully lift the suction button until the tension of
the spring is relieved.
3. Remove the suction button and spring.
4. Clean the suction chamber.
5. Assemble the suction chamber in the reverse order.

WEAR PARTS

The following components are wear parts and are excluded from the warranty:
• Filter media
• Impeller unit
• Suction cups
DISPOSAL
NOTE
Do not dispose of this unit with domestic waste.
• Render the unit unusable beforehand by cutting the cables and
dispose of the unit via the return system provided for this purpose.

SPARE PARTS

The use of original parts from OASE ensures continued safe and reliable operation of the unit. Please visit our
website for spare parts. https://www.oase-livingwater.com
Filter foams
Choose any combination of replacement pre-filter foams to create the best filtration for your aquarium's needs
Item no.
49626 BioMaster 30 ppi Pre-filter Foam Set
49560 BioMaster 45 ppi Pre-filter Foam Set
49583 BioMaster 60 ppi Pre-filter Foam Set
49744 BioMaster 45 ppi Carbon Pre-filter Foam Set
20
Description
BioMaster 250/350/600, BioMaster Thermo 250/350/600