Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
by our authorized service center unless indicated
elsewhere in this manual.
4.
Switch on the motor only when the hands and feet
are away from the cutting tool.
5.
Before starting make sure that the cutting tool has
no contact with any objects.
Method of operation
1.
Only use the equipment in good light and visibility.
During the winter season beware of slippery or
wet areas, ice and snow (risk of slipping). Always
ensure a safe footing.
2.
Take care against injury to feet and hands from
the cutting tool.
3.
Never stand on a ladder and run the equipment.
4.
Never climb up into trees to perform cutting
operation with the equipment.
5.
Never work on unstable surfaces.
6.
Remove sand, stones, nails etc. found within the
working range. Foreign particles may damage the
cutting tool and can cause dangerous kick-backs.
7.
Should the cutting tool hit stones or other hard
objects, immediately switch off the motor and
inspect the cutting tool.
8.
Inspect the cutting tool at short regular intervals
for damage (detection of hairline cracks by means
of tapping-noise test).
9.
Before commencing cutting, the cutting tool must
have reached full working speed.
10. The cutting tool has to be equipped with the
appropriate guard. Never run the equipment with
damaged guards or without guards in place!
11.
All protective installations and guards supplied with
the equipment must be used during operation.
12. Always remove the battery cartridge from the
equipment:
−
whenever leaving the equipment unattended;
−
before clearing a blockage;
−
before checking, cleaning or working on the
equipment;
−
after striking a foreign object;
−
whenever the equipment starts vibrating
abnormally.
13. Always ensure that the ventilation openings are
kept clear of debris.
Cutting Tools
1.
Employ only the correct cutting tool for the job in
hand.
Maintenance instructions
1.
The condition of the equipment, in particular of the
cutting tool of the protective devices must be
checked before commencing work.
2.
Turn off the motor and remove the battery
cartridge
before
carrying
out
maintenance,
replacing cutting tools or cleaning the equipment
or cutting tool.
3.
Check loose fasteners and damaged parts such
as cracks in the cutting attachment.
4.
Follow instructions for lubricating and changing
accessories.
5.
When not in use, store the equipment indoors in
dry and high or locked-up place - out of the reach
of children. Clean and maintain before storage.
6.
Use only the manufacturer's recommended
replacement parts and accessories.
7.
Inspect and maintain the equipment regularly,
especially before/after use. Have the equipment
repaired only by our authorized service center.
8.
Keep handles dry, clean and free from oil and
grease.
KEEP FOR FUTURE REFERENCE
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this
instruction manual may cause serious personal
injury.
CORDLESS HEDGE TRIMMER
SAFETY WARNINGS
1.
Hold the power tool by insulated gripping
surfaces only, because the cutter blade may
contact hidden wiring. Cutter blades contacting
a "live" wire may make exposed metal parts of the
power tool "live" and could give the operator an
electric shock.
2.
Keep all parts of the body away from the cutter
blade. Do not remove cut material or hold
material to be cut when blades are moving.
Make sure the switch is off when clearing
jammed material. A moment of inattention while
operating the hedge trimmer may result in serious
personal injury.
3.
Carry the hedge trimmer by the handle with
the cutter blade stopped. When transporting
or storing the hedge trimmer always fit the
cutting device cover. Proper handling of the
hedge trimmer will reduce possible personal injury
from the cutter blades.
4.
Do not use the hedge trimmer in the rain or in wet
or very damp conditions. The electric motor is not
waterproof.
5.
First-time users should have an experienced
hedge trimmer user show them how to use the
5
GEB062-2
Publicité
Table des Matières
