Default Settings - Interacoustics EyeSeeCam Instructions D'utilisation

Figure 4.4.7-5 Shaded areas show suggested thresholds. Values plotted in the white area are within suggested
threshold limits and values plotted in the gray area are outside the threshold areas. Head impulses to the right are
shown in red and to the left in blue.

Default Settings

If you are unsure of any changes made to any of the settings in your protocols or suggested thresholds
you can enter the Help menu and select Erase All Settings and Suggested Thresholds, which will reset all
settings back to the default values.
Figure 4.4.8-1 Help Menu for Default Settings
Before the default settings get reset you will get a pop-up message asking you to confirm the change. If
you choose "Yes" to confirm the changes EyeSeeCam will quit and you will need to restart the program.
Figure 4.4.8-2 Pop-up message to confirm reset to default settings
EyeSeeCam vHIT - Instructions for Use - EN Page 26