Esoteric Grandioso D1x Mode D'emploi page 18

Connecting with a computer and playing back audio files (continued)
1
Connect this product to the computer using a
USB cable.
Use a cable with a connector that matches that of this product .
o The USB port on this product is a B-type connector .
Computer
2
Turn the computer on.
Confirm that the operating system has started properly .
3
Press the POWER button to turn this product on.
o Turn both left and right channel units on .
18
Left channel
4
Press the INPUT button to select USB.
5
Start playback of an audio file on the computer.
For better audio quality, set the computer volume to its maxi-
mum and adjust the volume of the amplifier connected to this
product . Set the amplifier volume to the minimum when you
start playback and gradually increase it .
o The computer cannot be used to control this product, nor
can this product be used to control the computer .
o This product cannot transmit audio files to the computer by
USB .
o Do not do any of the following when playing back audio
files over the USB connection . Doing so could cause the
computer to malfunction . Always quit the audio playback
software before conducting any of these operations .
Unplug the USB cable
Turn a unit off
Change the input
o Computer operation sounds will also be transmitted when
playing back audio files over the USB connection . To avoid
outputting these sounds, make the necessary settings on
your computer .
o If you start the audio playback software before connecting
this unit with the computer or before setting the input to
USB, audio files might not play back properly . If this occurs,
restart the audio playback software or restart the computer .