Basic Operation; Setting Mode - Esoteric Grandioso D1x Mode D'emploi

Basic operation

o If the left and right channel link connectors have been connected
with the included HDMI cable, the left channel settings will auto-
matically be sent to the right channel .
1
Press the POWER buttons to turn the units on.
Keep pressing and holding until the ring around the POWER button
lights blue .
o Turn both left and right channel units on .
2
Press the INPUT button to select the source.
Each time you press the INPUT button, the active input changes
in the following order and is shown on the display .
ES-L1 ES-L2
USB OPT
o If the units are not linked, do this on each unit .
After selecting the input, start playback from the audio source
device .
If no digital signal is detected, no sampling frequency will be
shown on the display . Confirm the connections before turning
connected devices on .
o When you are done using the units, press the POWER buttons
to turn them off .
12
DUAL XLR
RCA2 RCA1

Setting mode

The settings for this product are divided into two groups: Settings 1
and Settings 2 .
The Settings 1 or Settings 2 group will be shown depending on how
the MENU button is pressed .
1
Press the MENU button to show the setting items.
Press the MENU button briefly to show the Settings 1 group .
Press it for at least three seconds to show the Settings 2 group .
2
Press the MENU button repeatedly to select the
desired setting item.
Each time you press the MENU button, the item shown on the
display changes .
Settings 1
UPC>
c
CLK>
c
AOUT>
o When the Settings 1 group is being shown, the MENU indica-
tor appears at the top left of the display .
Settings 2
DACM>
c
PCMG>
o When the Settings 2 group is being shown, the MENU indicator
appears blinking at the top left of the display .
APS>
3
DPaOFF>
3
DIMMER>
MQA_UPDATE>
3
REMOTE>