Kapro Prolaser Vector 873 GREEN Manuel D'utilisation page 10

OPERATING INSTRUCTIONS
Working in Automatic mode (self-leveling):
In automatic mode the laser level will level itself in the range of ± 5°
and will project horizontally or vertically or all 3 beams simultaneously.
1. Remove the laser from the case and place it on a solid flat
Vibration free surface or on a tripod.
2. Turn the locking switch #1 clockwise to the ON position.
The laser level will generate horizontal and vertical beams
forward, and additional orthogonal side vertical beam. The
green LED near the V/H push button will light up.
3. The laser will generate cross beams forward and cross
beams upward above the laser when all beams are activated.
4. Choose the beams that you want to work with by pushing the
Beam push button V/H
5. Use the adjustable metal legs #2 to adjust the height of the
horizontal beam.
6. If the initial level of the laser is beyond ± 5°and the automatic
mode is activated the laser beams will flash and a beeping alarm
will be heard. In this case reposition the laser on a more level
surface.
7. Before moving the laser level switch the locking switch #1 to
the OFF position this will lock the pendulum and protect
your laser.
10