Maintenance; Adjusting The Machine Slide Guide; Replacing The Carbon Brushes; Customer Service/Service - BDS Maschinen MAB 855 Mode D'emploi

Maintenance

Adjusting the machine slide guide

Replacing the carbon brushes

Customer service/service

MAB 855
WARNING
Danger from unqualified repairs!
Unqualified repairs can lead to considerable danger for the user
and cause damage to the machine.
►
Repairs to electrical appliances may only be carried out by
the works customer service or by specialists trained by the
manufacturer.
If the machine slide guide (13) exhibits too much clearance, it
must be adjusted. Proceed as follows:
‹
Loosen the clamping bolts.
‹
Tighten the adjusting screws evenly.
‹
Tighten the clamping bolts again.
Replacement of the carbon brushes may only be carried out
by BDS or by an authorised specialist workshop. Unauthorised
repairs will invalidate the guarantee.
Should you have any questions on customer service/service,
please contact BDS. We will be happy to give you the address of
your nearest service partner.
Maintenance
53