Problem Solving Tips - Green Cell INV15 Mode D'emploi

PROBLEM SOLVING TIPS

Connected devices do not work, and the green power indicator does not light up.
CAUSE
Battery defective or not functioning.
Reverse connection of negative and positive poles.
Untight cable connection.
The measured output current of the inverter is too low.
CAUSE
The range of readings of the standard ampmeter is too
low.
Inverter current level too low.
12 / EN
SOLUTION
Check the battery, replace if necessary.
Correct the connection of the battery, the inverter might
have been damaged. Replace the fuse inside inverter
(outside warrianty cover, contact us before opening up
the inverter for warranty).
Check the cables and the connection, tighten up the
wiring terminal.
SOLUTION
Measure the „modified sine wave" with the „True-RMS
meter' to get correct data.
Charge or replace the batteries.