THOMSON THVC2312WR Manuel D'instructions page 38

1. Disassemble the power brush
2. Using flathead screwdriver or coin, turn screw to the 'unlock'
position. Disassemble brush roll for cleaning and reassemble after all
parts are completely dried.
Tip: The brush roll and its cover are washable; Ensure they are completely
dried before use.
ATTENTION
1. When the dust blocks the air flow of the floor brush, please clean it with
a stick.
2. Except for the brush roll and its cover, all others cannot be washed with
water.
3. Do not apply oil to both ends of the brush roll.
4. Do not touch the working brush roll part and stay away from the air
outlet when in operation.
5. Do not use when wheels or scrubber's nylon loop are damaged.
6. Only to be used with the power supply unit provided with the
appliance.
Push
EN-38