THOMSON THVC2312WR Manuel D'instructions page 32

Tips: Choose location close to power outlet. Locate point high enough
on wall to allow wand and power brush to hand freely. Place wall
mount against wall and use pencil to mark drill holes. Drill holes (with
1/4"bit) and insert drywall anchors. Insert screws through holes on mount
and tighten until firmly attached.
Drywall anchors
Slide wand into main body until it clicks.
-
Push wand into power brush until it clicks.
-
Accessories can be connected with wand When cleaning high
-
position.
How to connect accessories?
EN-32
Screws