Publicité
Les langues disponibles
Les langues disponibles
Remove the four securing bolts (1).
5.
Turn down the four leveling feet (2) to lift the machine.
6.
Remove the wooden blocks (3).
7.
Figure 7: Removing transport parts.
Remove the screws from the support block (6) and turn the block to remove it from underneath
8.
the machine.
Turn up the four leveling feet (2) completely to put the machine on its castors (5).
9.
Roll the machine off carefully from the pallet using the ramps.
10.
WARNING:
ROLL THE MACHINE OFF WITH 2 PERSONS. IT IS HEAVY AND CAN NOT BE
CONTROLLED ALONE.
Note: Save all packing material for later moving over long distances or discard of according to
local regulations.
4.2 Installation
Move the machine (and the accessories) to its final location.
1.
Installation
Note: Allow ample working space. See
Figure 8.
L = Maximum board length,
S = Minimum space 60 cm.(24"),
X
= 130 cm (51"),
1
X
= 330 cm (130")
2
11
Publicité
