Publicité
Les langues disponibles
Les langues disponibles
IV. GETTING STARTED
4.1- Unpacking
We recommend that at least 2 persons unpack the log cutting saw package.
Remove product from its packaging.
Check that product and accessories are not damaged.
Content:
1. Main machine
2. Wheels
3. Operating handle
4. Ruler bar
5. Wood support
6. Cover for working table
7. Weight balancer
8. Connecting plate for vice working
table
9. Vice working table
4.2- Assembly
For packing reasons, the machine is not completely assembled and therefore requires some assembly
from the user.
Return spring system assembly
The return spring system is composed of a spring and a rod.
The rod is threaded on one end and pierced on the other end.
Fig.2 – Unscrew the support shaft (a)
Fig.3 - Remove the support shaft (a) from rod (b), do NOT remove from leg.
Unscrew and remove the M18 nut (c) from the rod (b).
Fig.4 - Insert rod threaded end through the hole (d) on frame bottom,
Insert support shaft (a) through rod (b), and screw firmly.
Fig.5 - Secure rod threaded end with M18 nut (c).
Fig.2
Fig.3
Page 32 of 43
Publicité
