LENCO CD-300 Mode D'emploi page 9

standard, they may not play properly.
Play the CD
1. Follow previous Setup page.
2. Slide the DOOR OPEN switch to open the CD door and install the disc to disc compartment.
Close the CD door and press the PLAY/PAUSE
1. Pause:
2. Stop:
the unit.
Using Resume function
The resume function will remember which track and time you stopped. When you start playback again
the player will automatically start from the same point where you have stopped.
1. To use the resume function you have to press the stop button twice. The player will be powered off.
To start listening again, press the PLAY/PAUSE
from the point where you left.
2. If you press the stop button only once, the player will stop and not be powered off. If you press the
PLAY/PAUSE
from track 01.
1. Repeat 1 track:
repeatedly.
2. Repeat all track:
repeatedly.
3. Intro play:
track.
4. Shuffle play:
4. Repeat steps 2 - 3 to program as many as 20 tracks.
to start playback again the player will cancel the resume function and start playing
button to start playing.
button once and the player will resume playback
1
ALL
9