Publicité
Les langues disponibles
Les langues disponibles
Notes
• If you connect a VCR to the ˘ (antenna) terminal, preset the signal
• When no signal is input to the connected video equipment, the TV screen
CAUTION
Do not connect the power cord until all other connections are complete;
otherwise, a minimal current leakage through the antenna and/or other
terminals to the ground could occur.
Step 2
Insert the batteries
into the remote
Note
• Do not use old batteries or different types of batteries together.
Step 3
Preset the channels automatically
Front of TV
ONE-PUSH AUTOMATIC PROGRAMMING
Tips
• To exit automatic channel presetting, press SELECT twice.
• If an unwanted channel has been preset or you cannot preset a particular
Now You Are Ready. . .
To watch the TV, see page 11.
output from the VCR to the program number 0 on the TV.
becomes blue.
1
2
ONE-PUSH AUTOMATIC PROGRAMMING
channel, preset your TV manually (see page 9).
1
1
Using Your New TV
5
Publicité
