Publicité
Les langues disponibles
Les langues disponibles
PLAYING A DISC
Getting
started
Turn on the power of the TV, amplifier and any other
components which are connected to the DVD player.
(Change the input system to suit the DVD player, and
check that the sound volume is correct.)
'_ Press the ON/STANDBY (POWER) button
• The power will turn on.
£
Press the OPEN/CLOSE buRog_
• The disc loading tray will open.
3
P_aee the DiSC SKIP button repeetedl_g or
the DISC NUMBER button
• The desired disc tray moves to the front position.
4
Piece e disc ntothet_eg
• Make sure the disc is sitting properly in lhe correct
recess, with 1he label side up.
Notes
• While the setup menu is shown you can not open or
close the tray.
• A "prohibited icon" may appear at the
_"
top-right
on the TV screen during
operation, warning that a prohibited
operation has been encountered by the
DVD player or the disc.
• If a disc is dirty or has scratches, the pictures may
appear distorted and the playback operation may
stop. In such cases, clean the disc and unplug the
power cord and then plug it again before resuming
playback.
• With DVDs
that use some titles for playback
program signals, playback may start from 1he sec-
ond title, or it may skip lhese titles.
• During the playback of two layered disc, pictures
may stop for a moment. This happens when the 1st
layer switches to the 2nd layer. This is not a mal-
function.
• The operation
may vary when you playback
DVDs
with disc menu. Refer to the manual
accompanying
the disc for details.
• Repeat
steps 3 and 4 to load more discs.
• When the DVD player has finished
playing the cur-
rent disc, it will go to the stop mode or DVD menu
screen.
Right side tray
Left side tray
5
Preee the PLAY barton,
• You can open
the tray and change
2 discs during
playback
by pressing
the DISC EXCHANGE
but-
ton.
• Disc position
will be displayed
on the TV screen for
about 5 seconds
when you turn on the power
or
close the tray.
• The tray will close automatically,
and playback
will
then start from the first chapter
or track of 1he disc
on the left side. You may need to press the PLAY
button for some discs when the 1ray has been closed
by pressing
the OPEN/CLOSE
button.
• If the disc has not been
set on the tray, the DVD
player will play the disc which is set on the right side
tray.
• When you want to select the other disc, press the
DISC SKIP button repeatedly or the DISC NUM-
BER button for your desired disc.
• When you play back the DVD which a title menu is
recorded, the menu may appear on the screen. In dais
case, refer to "USING THE TITLE MENU".
6
Press the STOP button tostopplay.
-15
Some DVDs contain
their own menus,
such as a guid-
ance menu which describes
the contents
of the disc or
a selection
menu for sound,
language
and other cus-
tomized
settings.
Press the MENU batten,,
• The DVD menu will appear.
2
Select the deei_ed tte_
• Press the cursor buttons
(V/A/I_/'ql)
to change the
setting,
and then press the ENTER
button.
3
P_aybsek w
start from the selected
tNe,,
Publicité
