Publicité
Les langues disponibles
Les langues disponibles
.o_o
s-
1
2
3
m
g161_ O UT
- irod/ eVF.Aia I -
4
5
@
rn
o'o
_
ALIDIn
griT - -
6
1. S-VIDEO
OUT JACK
Use the S-Video cable to connect
this jack to the S-Video jack on your A/V-compalible
TV or wide screen
TV for a higher quality
picture.
2. VIDEO
OUT JACK
Use a video cable to connect
one of 1he jack to Video input on your A/V-compatible
TV or wide screen
TV, Stereo system.
3. COMPONENT
VIDEO
OUT JACKS
Use these jacks if you have a TV with Component
Video in jacks. These jacks provide
C_, C_ and Y
video. Along with S-Video, Component
Video provides
the best picture quality,
4. PROGRESSIVE
switch
5. DIGITAL
OUT JACKS:
Use either an optical or coaxial
digital cable to connect
to a compatible
Dolby Digital receiver.
Use to
connect
to a Dolby Digital
decoder
or DTS decoder,
6. AUDIO
OUT JACKS
Connect
to the Audio input jacks of AN-compatible
TV or wide screen TV, Stereo syslem.
Selecting
Progressive
Scan
(480p or Interlaced
480i) Playback
• If your TV is compatible with progressive scanning (480p), connect the TV to the Component Video Output
jacks of the DVD player and set the Progressive switch on the back of the DVD player to "PROGRESSIVE",
Next, set your TV to the progressive scan mode,
If your TV is not compatible with progressive scan, keep the Progressive switch to "INTERLACE".
• Use a commercially available adaptor if the video input jacks of your TVs or monitors are the BNC type.
What
is Progressive
Scanning?
• Unlike conventional interlace scanning, the progressive scan system provides less flickering and images in
higher resolution lhan that of traditional (480i) television signals.
The DCDi (Directional
Correlational
De-interlacing)
system of this DVD player produces
smooth
and
natural
video images,
even if really dynamic,
by eliminating
the jagged
edges. "DCDi"
is a registered
trademark
of Faroudja,
a division
of Sage lnc,
- 12-
Publicité
