Télécharger Imprimer la page

GreenWorks CRT306 Manuel D'utilisation page 23

Publicité

Les langues disponibles

Les langues disponibles

10.3.2 CHARGE THE PRODUCT
Open the port cover to charge and close the cover once the charging is finished to reduce the risk of electric shock.
1. Open the port cover from the battery charging port on the mower.
2. Plug the charger into the battery charging port.
3. Plug the charger into a power outlet.
4. When the mower is charging, the digital display will show the battery percentage.
See the Charger Manual for warnings and instructions for charging. Read and understand all its safety warnings
and instructions. Failure to follow them may result in electrical shock, fire and/or serious injury.
To reduce the risk of fire and explosion, keep open flames and sparks away from the mower and its battery. Ensure
proper ventilation around the mower while charging.
Charging recommendations:
The battery does not need to be fully discharged before recharging. To maintain proper state of charge
calibration, run and charge the mower at least once a month. Complete a full charge every six months.
A battery left uncharged will slowly discharge. Before initial use each spring season, be sure battery has a full
charge before mowing.
Check the battery every six months and charge the battery if the power level is below 50%.
When the battery capacity is lower than 5%, the working blades will stop automatically. The max driving speed
will be 2.5 mph. The product should be charged immediately.
English
WARNING
WARNING
23
EN

Publicité

loading

Ce manuel est également adapté pour:

Crt308Trcdcbl1413Trb4568Ztb456