Varan Motors NEGJH-04 Manuel D'utilisation page 41

Troubleshooting
Check
difficulties in starting
engine in cooling state
Difficulties in restarting
after a sudden stop
Reluctance in speeding and
weakness in power
abnormal sound
The machine is working
normally, but the efficiency
of cracking is
very low
Storage
1.
Clean the machine before storage.
Perform maintenance operations before storage.
For prolonged periods of storage, drain the oil and gasoline from the tanks, and lubricate the chain and moving
parts.
2.
Remove spark plug
3.
Clean accessory
4.
Product must be stored in a dry clean location, protective from frost and excessive heat. Always lock up
product and keep out of reach of children
Disposal
Before disposal, drain oil and mixture from the tanks and dispose according to your local regulations.
-
Machine: do not dispose with household garbage. Do not throw into the environment.
Dispose of the product in a collection centre for waste or seek advice from your local municipality.
-
Proceed with disposal of remnants, machine, accessories and packaging according to local regulations
regarding the protection of the environment.
Varan motors
BCIE SARL, gruuss-strooss 28, 9991 Weiswampach, Luxembourg
Probable cause
spark plug is fouled/wet
spark plug does not produce electric spark
Too much fuel absorbed
fuel runs out or the Carburetor is blocked
fuel filter is blocked
Too much carbon deposit in igniter plug
Carbon deposit cover the entrance of the
cylinder or silencer
oil tube and the air vent on the fuel Tank
cover is blocked
Blockage in air filter
Carbon deposit found in combustion
chamber
Serious abrasion in active components
The chisel edge/tip chisel is worn out
NEGJH-04
Action
Dry the spark plug
Replace spark plug
Clean spark plug,
Lessen fuel supply
Refill fuel tank or clean
the carburetor
clean the fuel filter
Clean spark plug
Remove carbon deposit
Clean
Clean filter
Remove carbon deposit
Replace components
Replace
T: 00352/26908036 – F: 00352/26908040