Handling Fuel - Varan Motors NEGJH-04 Manuel D'utilisation

Varan motors
BCIE SARL, gruuss-strooss 28, 9991 Weiswampach, Luxembourg
Avoid injury from unexpected accident
Danger! Keep body clear of moving parts!
Do not straddle or reach across the impact area when operating the machine.
Only use your hands to operate the control levers.
Never use your foot, knee, a rope, or any other extension device. Keep hands
out of the way of all moving parts.
Never try to split two pieces on top of each other. One of them may fly up and hit you.
Never leave an operating tool unattended.
Never leave product until it has come to a complete stop.
IF SOMEONE COMES
1.
Guard against hazardous situations at all times. Warn adults to keep pets and children
away from the area. Be careful if you are approached. Injury may result from flying debris.
2.
If someone calls out or otherwise interrupts you while working, always be
sure to turn off the engine before turning around.
MAINTENANCE
1.
In order to maintain your product in proper working order, perform the maintenance
and checking operations described in the manual at regular intervals.
2.
Always be sure to turn off the engine before performing any maintenance or checking
procedures..
Warning: The metallic parts reach high temperatures immediately after
stopping the engine.
3.
Whenever replacing the bit or any other part, whenever greasing, make sure to only
use certified products.
4.
In the event that any part must be replaced or any maintenance or repair work not
described in this manual must be performed, please contact a representative from the
store nearest authorized servicing dealer for help.
5.
Under no circumstances should you ever take apart the product or alter it in any way.
Doing so might result in the product becoming damaged during
operation or the product becoming unable to operate properly.

HANDLING FUEL

1.
The engine of the product is designed to run on a mixed fuel, which contains highly
flammable gasoline. Never store cans of fuel or refill the tank of the unit in any place where
there is a boiler, stove, wood fire, electrical sparks, welding sparks, or any other source of
heat or fire which might ignite the fuel.
2.
Never smoke while operating the unit or refilling its fuel tank.
3.
When refilling the tank, always turn off the engine and allow it to cool down. Take a
careful look around to make sure that there are no sparks or open flames anywhere
nearby before refueling.
4.
Wipe spilled fuel completely using a dry rag if any fuel spillage occurs during
refueling.
5.
After refueling, screw the fuel cap back tightly onto the fuel tank and then
NEGJH-04
T: 00352/26908036 – F: 00352/26908040