Bosch LE10 Manuel D'utilisation page 32

32 en | Product information
Mode Name
4 Dementia with
Accompany
5 Remote control
6 Open receiver
7 Open receiver with
reduced range
NOTICE!
Factory setting is Normal mode 1.
F.01U.139.675 | V1 | 2009.10
Description
This mode allows the LE10 Radio Receiver to
be connected to a wired NurseCall system, in
which the Accompany function can be
implemented. Here the LE10 Radio Receiver
will wait 10 seconds after receiving a signal
from a S37L transmitter. If it detects a S37E
transmitter in this lapse of time, then no
alarm is generated. If not, then Relay 1 is
activated for 2 seconds.
20 wireless transmitters can be
programmed. Per sequence, only the same
transmitter can switch on and off the Relay1.
A battery-low signal is indicated by LED 2
and Relay 2.
No wireless transmitter needs to be
programmed. Any transmitter within
reception range of the LE10 Radio Receiver
can activate the device.
Same functions as in mode 6, but with
reduced range. This functionality is designed
to improve reception of transmitters located
closer to the LE10 Radio Receiver.
User Manual
LE10 Radio Receiver
Bosch Security Systems