Features - Homelite UT60526 Manuel D'utilisation

SERVICE
Servicing requires extreme care and knowledge and should
be performed only by a qualified service technician. For
service we suggest you return the product to your nearest
AUThORIZED SERVICE CENTER for repair. When servic-
ing, use only identical replacement parts.
WARNING:
The operation of any power tool can result in foreign objects being thrown into your eyes, which can
result in severe eye damage. Before beginning power tool operation, always wear safety goggles or
safety glasses with side shields and, when needed, a full face shield. We recommend Wide Vision Safety
Mask for use over eyeglasses or standard safety glasses with side shields. Always use eye protection
which is marked to comply with ANSI Z87.1.
PRODUCT SPECIFICATIONS
Engine Size ......................................................................................................................................................................26cc
Engine Output ..............................................................................................................................................................0.8 HP
KNOW yOUR CULTIVATOR
See Figure 1.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating features and safety rules.
ENGINE SWITCh
The engine switch controls the ignition system. The switch
must be in the on ( I ) position for the engine to start and run.
To stop, place the switch in the off ( O ) position.
RECOIL STARTER
The recoil starter is used for starting the engine.
SyMBOLS
WARNING:
To avoid serious personal injury, do not attempt to use this
product until you read thoroughly and understand com-
pletely the operator's manual. If you do not understand
the warnings and instructions in the operator's manual,
do not use this product. Call Homelite customer service
for assistance.

FEATURES

PRIMER BULB
The primer bulb pumps fuel from the fuel tank to the
carburetor. This is necessary only when starting a cold engine
or after refueling an engine that has run out of fuel.
START LEVER
The start lever opens and closes the choke valve in the
carburetor. The START position enriches the fuel mixture
for starting a cold engine. The RUN position provides the
correct fuel mixture for normal operation after starting, or
for restarting a warm engine.
ThROTTLE LEVER
The throttle lever controls the rotation speed of the tines.
Completely engage the throttle lever while cultivating.
6 - English