Sony BRAVIA XBR-85X850F Manuel De Référence page 5

2
Secure the TV to the Stand.
Use the optional hardware listed as follows (not
supplied):
• M6 machine screws (screwed into the TV's rear cover).
• A screw or similar (attach it to the Stand).
• Rope or chain (strong enough to support the weight of
the TV). Make sure that there is no excess slack in the
rope or chain.
XBR-85X850F
Screw hole on the rear cover
Rope or chain (not supplied)
Screw (not supplied)
M6 machine screw
(not supplied)
1.5 N·m/1,5 N·m
{15 kgf·cm}
XBR-75/65X850F
Screw hole on the rear cover
M6 machine screw
(not supplied)
Rope or chain (not supplied)
Screw (not supplied)
The length of the M6 machine screw differs depending
on the rope or chain diameter. Please refer to below
illustration.
XBR-85X850F
8 mm – 12 mm
Screw (M6)
Rope or chain
TV's rear cover
XBR-75/65X850F
10 mm – 13 mm
Screw (M6)
Rope or chain
TV's rear cover
US
1.5 N·m/1,5 N·m
{15 kgf·cm}
5
US