Publicité
Les langues disponibles
Les langues disponibles
SAFETY
► Source of hazard: Appliance mechanics
Hazard
Risk of crushing
parts of the body
in case of tip-over
or fall of the ap-
pliance
HAZARDS AND SAFETY PROVISIONS DURING ASSEMBLY
When assembling the appliance, watch out for the following hazards and provide for the coun-
termeasures indicated below:
► Source of hazard: Handling of heavy loads
Hazard
Risk of injury due
to body overload
3269941_GB_rev.1
Where or in which situations
does the hazard occur?
• When
the
appliance
moves
Where or in which situations
does the hazard occur?
• When
the
appliance
moves
Countermeasures
• Use a suitable lifting
device
• Pay attention to the
centre of gravity
• Avoid collisions
Countermeasures
• Use a suitable lifting device
to place the appliance on
the work bench, on the base
• Adjust the position only if a
suitable number of people
is available, otherwise ob-
serve the limit values for lift-
ing and transport
• Comply with the applicable
laws on accident prevention
for the installation place
• Wear personal protective
equipment
ENGLISH
Safety device
• Protective gloves
• Protective shoes
• Safety
helmet
(e.g.
for
sus-
pended
loads,
overhead opera-
tions...)
Safety device
• P r o t e c t i v e
gloves
• P r o t e c t i v e
shoes
• Safety
hel-
met (e.g. for
s u s p e n d e d
loads, over-
head opera-
tions...)
5
Publicité
