Publicité
Les langues disponibles
Les langues disponibles
Model 1836
BURNER MAINTENANCE
In most circumstances, burning
residue o after cooking will keep
burner clean.
• Ensure that the flow of combus-
tion and ventilation air is
not obstructed.
• Burner should be removed and
cleaned annually or whenever
heavy build-up or insects/insect
nests are found in order to ensure
that there is no blockage in the
burner portholes or venturi tubes.
• Use pipe cleaner to clear obstruc-
tions. A wire brush may be used to
remove corrosion from the burner
surfaces.
MATCH LIGHTING
INSTRUCTIONS
Before beginning, check for gas
leaks. (Please reference the
Leak Test Instructions in the Fuel
chapter.)
S T E P 0 1
Ensure control knob is
in OFF position.
S T E P 0 2
Remove cooking top.
S T E P 0 3
Light a match (or long
lighter) no shorter than 11 inches
long. Place the flame on the right or
left side of the burner.
S T E P 0 4
Push in and turn the
control knob to the HIGH position.
Ensure burner lights and stays lit.
BURNER FL AME CHECK
Always check burner flame
before use.
S T E P 0 1
Light burners and rotate
knobs from high to low. When knob
is at high, flames should be larger
than when knob is at low.
S T E P 0 2
Perform burner flame
check by looking below cooking
top on the side of unit to view
burners below.
If there is a sudden drop or low
flame issue, please reference the
Troubleshooting chapter.
Care & Maintenance
| Owner's Manual
!
WA r n I n G
A clogged burner
tube can lead to a fire
beneath the appliance.
Healthy flames might have a few
flickers of yellow color ❶ , then a
dark blue color ❷ , followed by a
vibrant blue by the burner tube ❸ .
❶
❷
❸
19
Publicité
