Blackstone 1836 Manuel Du Propriétaire page 10

Owner's Manual | Assembly Guide
! !
WA r n I n G WA r n I n G
The manufacturer has made The manufacturer has made
every effort to eliminate any every effort to eliminate any
sharp edges. However, you sharp edges. However, you
should handle all compo- should handle all compo-
nents with care to avoid nents with care to avoid
accidental injury. accidental injury.
Some parts may contain Some parts may contain
sharp edges, especially sharp edges, especially
as noted in these instruc- as noted in these instruc-
tions. Wear protective tions. Wear protective
gloves if necessary. gloves if necessary.
! !
WA r n I n G WA r n I n G
The use of alcohol, prescrip- The use of alcohol, prescrip-
tion or non-prescription tion or non-prescription
drugs may impair the drugs may impair the
consumer's ability to prop- consumer's ability to prop-
erly assemble or safely erly assemble or safely
operate the appliance. operate the appliance.
!
C A U T I o n
Two people are recom-
mended for the assembly
of this product.
!
C A U T I o n
• Maximum weight on the side
shelf is 10 lbs.
• The side shelf is a high
heat area.
HoT
06
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS
Please read all instructions thoroughly before proceeding. Make sure all Please read all instructions thoroughly before proceeding. Make sure all
the plastic packing material is removed before assembling. the plastic packing material is removed before assembling.
Find a large, clean area to assemble your unit. Please refer to the parts list and Find a large, clean area to assemble your unit. Please refer to the parts list and
assembly diagrams as necessary. assembly diagrams as necessary.
S T E P 0 1
Remove the griddle
body from the packaging and
lay it upside down on a smooth,
flat surface with the help of
another person.
Pull the locking pin to release the
legs and raise them to a vertical
position. Use the pre assembled
wheel bolt and nut to attach the two
(2) wheels to the legs as shown.
S T E P 0 2
Place the bottom shelf between the legs. On the caster side of
the body, place the propane tank support in place and use the M6x40 thumb
screw to attach the shelf and the support to the griddle body. Use the M6x60
thumb screw to attach the other side of the shelf to the griddle legs.
Model 1836