Télécharger Imprimer la page

Blackstone 1836 Manuel Du Propriétaire page 16

Publicité

Les langues disponibles

Les langues disponibles

Owner's Manual |
Fuel | 20 lb. Propane Tank
!
D A n G E r
Do not insert any tool or
foreign objects into the valve
outlet or safety relief valve.
The valve may be damaged
resulting in a leak.
Leaking
propane may result in explo-
sion, fire, severe personal
injury, or death.
If a leak is detected at any
time, STOP and call the
fire department.
If unable to stop a gas leak,
immediately close LP tank
valve and immediately
contact an LP gas supplier
or fire department.
!
WA r n I n G
Do not insert a POL trans-
port plug (plastic part with
external threads) into the
Type 1 tank valve outlet. It
will defeat the Safety Relief
Valve feature.
12
Section 02
CONNECTION & REMOVAL
REGUL ATOR SAFE T Y
If regulator fails in unit, it must be
replaced with a Blackstone approved
model and must only be replaced by
a professionally licensed, authorized
dealer. Failure to comply will void
the warranty.
FIT TINGS & HOSES
• Annual checking and tightening
of metal fittings is recommended.
• Cylinder supply system must be
arranged for vapor withdrawal.
Before each use, check to see if hoses
are cut or worn. Replace damaged
hoses before using appliance.
Use only Blackstone approved
replacement parts for valve, hose, or
regulator.
20 LB. LP TANK
REMOVAL FOR
TRANSPORT OR
STORAGE
S T E P 0 1
Turn OFF all control
knobs. Turn LP cylinder OFF by
turning hand-wheel clockwise to a
full stop.
S T E P 0 2
Turn coupling nut
counterclockwise by hand only. Do
not use tools to disconnect.
S T E P 0 3
Lift LP tank up and off
of support bracket.
S T E P 0 4
Install safety cap onto
LP tank valve.
Always use cap and strap
supplied with valve.
Failure to use safety cap as directed
may result in serious personal injury
and/or property damage.
A disconnected LP tank in storage or
during transportation must have a
safety cap installed (as shown).
LP Tank valve
Retainer strap
Model 1836
Safety cap

Publicité

loading