The Ctv101 Speed Control Unit; Front Panel - Radiometer Analytical CTV101 Mode D'emploi

The CTV101 Speed Control Unit

The CTV101 Speed Control Unit The CTV101 Speed Control Unit
The CTV101 Speed Control Unit The CTV101 Speed Control Unit
The CTV101 Speed Control Unit is used to adjust and read the rotation
speed of the EDI101 electrode with an accuracy of
± 2 rpm (revolution per minute).

Front panel

Front panel
Front panel Front panel Front panel
Display (7)
Four-digit LCD display, 11 mm high.
Potentiometer (8)
The 10-turn potentiometer is used to adjust the rotation speed of the
EDI101 when switch (9) is positioned in "0 -5000 rpm" position.
Three position switch (9)
In "0 - 5000 rpm" position, the rotation speed of the EDI101 is adjusted
by turning potentiometer (8).
In "STOP" position, the EDI101 is stopped.
In "EXTERNAL CONTROL" position, the rotation speed of the EDI101
can be controlled by an external DC voltage generator. The rotation speed
is linearly proportional to the generator voltage output (0 to 5 Volt for 0 to
5000 rpm).
6