Description; The Edi101 Rotating Disc Electrode - Radiometer Analytical CTV101 Mode D'emploi

Description

Description Description
Description Description

The EDI101 Rotating Disc Electrode

The EDI101 Rotating Disc Electrode The EDI101 Rotating Disc Electrode
The EDI101 Rotating Disc Electrode The EDI101 Rotating Disc Electrode
The EDI101 Rotating Disc Electrode comprises the following:
. the electrode motor (2),
. the electrode body (5) with the electrode disc holder tip (6).
The motor part (2) is screwed onto the electrode body (5) and the tip (6)
onto the electrode body.
The electrode body (5) comprises:
. female banana socket (3) (4 mm diameter) for the electrical circuits
ensuring the contact between disc and the voltage generator
(potentiostat or polarographic analyzer),
. 5-pin female DIN socket (1) for connection to the CTV101 Speed
Control Unit,
. gas inlet (4) for a gas (nitrogen, helium) to protect the electrode
bearings from corrosion and clogging agents.
The insulating and watertightening parts are made in Kel-F, a chemically
inert material.
Figure 1
4