Install Range Hood - Elica ELI136S1 Guide D'utilisation, D'entretien Et D'installation

Install range hood

Install Range Hood
1 Place the template in the ceiling considering the
instructions for ceiling support structures.
: Always consider the front of hood legend when
NOTE
playing the template on the ceiling.
It will define the control's location.
2 Mark with a pencil the hole locations for screws and
duct in the ceiling.
3
Fix the upper horizontal support with 4 - 5x45 mm
screws.
8
4 Install the lower horizontal support with 8 - 4.2 x 8 mm
screws.
A
A. Lower horizontal support
B. 8 - 4.2 x 8 mm screws
5 Install the middle horizontal support to the hood with
8 - 4.2 x 8 mm screws.
A
B
A. Middle horizontal support
B. 8 - 4.2 x 8 mm screws
6 Install the 4 upper vertical supports to the hood with
16 - 4.2 x 8 mm screws.
A
B
A. 4 - Upper vertical supports
B. 16 - 4.2 x 8 mm screws
B